New information update daily

Visit my blog everyday to get fresh information about computer and gadget

Latest information about computer and gadget can be found here, updated everyday

We always updated our information every hour

Every hour you'll get fresh information about computer and technology

Come and visit my blog everyday

The information are coming from a whole world

Visit my blog everyday to get a worldwide news about computer and technology

Visit us everyday

visit my blog everyday

Showing posts with label Rules. Show all posts
Showing posts with label Rules. Show all posts

Sunday, September 25, 2011

TECHNOLOGY, Arduino Rules at Maker Faire New York

How many microcontrollers do you count?Arduino might as well exploded all over last weekend's Maker Faire in New York City, because it was everywhere. There was a whole new tent dedicated to it, four panels to just explain what it was, and more manufacturers than I knew even existed. It’s Arduino Fever!
So take a minute to get up to speed with the Arduino microcontroller, then join us as we look at some ridiculously amazing Arduino creations.
Make Yourself an Arduino Lie Detector

It’s easier to make than you think. Julio Terra and Mustafa Bagdatli of NYU’s ITP Program put one together using an Arduino microcontroller, breadboard, 4 LEDs, a few wires, some resistors, and finger contacts made of some silver jewelry stitched to Velcro and soldered to wires.
The typical lie detector we see in movies and TV shows, with the finger glove and wires drawing lines over a rolling page, works by sending a small current through your finger. The needles move based on how much of that current is conducted through your sweaty skin, because everyone constantly sweats even if you don’t notice.
This particular homemade lie detector skips the needles and uses the LEDs to tell when you are lying. All you have to do is wire it up correctly and upload the software, courtesy of Julio Terra. The Arduino lie detector, like a “real" one, should be taken with a grain of salt because it is hypersensitive and is more liable to pick up embarrassment, rather than tell the difference between a true statement and a lie.
New Connected Flavors of Arduino
Arduino boards are great microcontrollers on their own, but if you wanted to add any sort of connectivity to an Arduino, you need to buy a shield. Shields are essentially board expansion packs (to borrow a gaming term) that add functionality. However, a few chipmakers are developing their own flavors of Arduino with built-in connectivity.
A Nanode board connected with Ethernet and equipped with a transmitter.
Across the pond in the UK, Nanode has been making a name for itself with its Arduino variant that has built-in Web connectivity. While it’s connected to a network, the board can be loaded with software remotely and it can also automatically pull updated versions of its software. The Nanode can support a few more additions, like extra memory on its underside and a wireless transmitter that it can use to send data.
The BluePanel board.
A smaller outfit called Teho Labs showed off its BluePanel Arduino boards, which connected to an Android device over Bluetooth. For this particular demo Teho Labs had six microcontrollers connected to a single RF slave that synced to their Android BluePanel app. From the app I could move a servo, switch on a lamp, or check the room’s temperature.
The Arduino Trade Show
Weblock’s spread of LED arrays and chips.
The Arduino tent was a new edition to Maker Faire, and inside you could find nearly a dozen small chip developers. ChipKIT specializes in the first 32-bit microcontrollers. Wetterott builds touchscreen interfaces and WLAN shields for Arduino. Telefonica has GSM shield components that add phone services to Arduino, allowing it to receive texts and make calls. The Weblock desk had a small cache of LED arrays, and Jeelabs has just about any component you would want.
What would you do with an Arduino board? Leave a comment with your project ideas.
Like this? You might also enjoy…

Saturday, September 24, 2011

FCC Publishes Net Neutrality Rules

AppId is over the quota
AppId is over the quota

After 10 months on the shelf, the Federal Communications Commission's rules on net neutrality were finally published today in the Federal Register.

As written, the rules do three broad things for customers:

- Add transparency to how broadband providers--both wired and wireless--manage networks

- Prohibit wired broadband providers from blocking lawful content, applications, services, and non-harmful devices. Wireless providers are also barred from blocking lawful websites or applications that compete with voice or video services.

- Forbid wired broadband providers from discriminating in the transmission of lawful network traffic.

However, just because the rules have been published doesn't necessarily mean they'll take effect on November 20, as they're supposed to. This is because we expect both wired and wireless providers to challenge these rules in the courts--the way Verizon and MetroPCS challenged them back in January. The Verizon and MetroPCS cases were tossed, but only because the rules hadn't been finalized.

Approval of the rules in December 2010 was strictly along party lines. Three Democrats voted yes for the rules; two Republicans voted no. Since that time, one of the Republicans has accepted a job at Comcast.

Comcast actually spurred the FCC into action after it throttled BitTorrent traffic on its network. The FCC tried to penalize Comcast for this move, but a court ruled against the agency--since the FCC had no rules on net neutrality, it couldn't penalize Comcast for violating anything.

"The rules developed by the FCC take important steps to ensure that the Internet remains an open marketplace," Parul P. Desai, policy counsel for the Consumers Union, said in a statement.

"When purchasing Internet service, consumers rightfully expect that they will have equal access to all that the Web offers and shouldn't be held back because of industry tactics," Desai added. "For the first time, there will be clear rules to protect consumers and keep the Internet growing as an open, innovative environment."

President and co-founder o Public Knowledge Gigi B. Sohn wishes the rules were stronger--but says the regulations are a "good start."

"Companies providing Internet access services have informally abided by a neutrality policy since the FCC acted," Sohn said in a statement. "In that time, the Internet has not come crashing down and the government has not taken control over it."

Still, the rules and their creators have critics.

"The rules passed in December are riddled with loopholes," Matt Wood, policy director for Free Press told PCWorld in an email. "They don't do enough to stop the phone and cable companies from dividing the Internet into fast and slow lanes, and they fail to protect wireless users from discrimination that is already occurring in the marketplace and that will only get worse."

"Even in their watered-down form, the rules might do some good," Wood acknowledges. "But that would require a vigilant FCC to carefully monitor and address complaints. This Commission's track record suggests that it isn't inclined to take decisive action to protect consumers."

Follow freelance technology writer John P. Mello Jr. and Today@PCWorld on Twitter.



View the original article here



Peliculas Online

Arduino Rules at Maker Faire New York

AppId is over the quota
AppId is over the quota

How many microcontrollers do you count?Arduino might as well exploded all over last weekend's Maker Faire in New York City, because it was everywhere. There was a whole new tent dedicated to it, four panels to just explain what it was, and more manufacturers than I knew even existed. It’s Arduino Fever

So take a minute to get up to speed with the Arduino microcontroller, then join us as we look at some ridiculously amazing Arduino creations.

Make Yourself an Arduino Lie Detector

It’s easier to make than you think. Julio Terra and Mustafa Bagdatli of NYU’s ITP Program put one together using an Arduino microcontroller, breadboard, 4 LEDs, a few wires, some resistors, and finger contacts made of some silver jewelry stitched to Velcro and soldered to wires.

The typical lie detector we see in movies and TV shows, with the finger glove and wires drawing lines over a rolling page, works by sending a small current through your finger. The needles move based on how much of that current is conducted through your sweaty skin, because everyone constantly sweats even if you don’t notice.

This particular homemade lie detector skips the needles and uses the LEDs to tell when you are lying. All you have to do is wire it up correctly and upload the software, courtesy of Julio Terra. The Arduino lie detector, like a “real" one, should be taken with a grain of salt because it is hypersensitive and is more liable to pick up embarrassment, rather than tell the difference between a true statement and a lie.

New Connected Flavors of Arduino

Arduino boards are great microcontrollers on their own, but if you wanted to add any sort of connectivity to an Arduino, you need to buy a shield. Shields are essentially board expansion packs (to borrow a gaming term) that add functionality. However, a few chipmakers are developing their own flavors of Arduino with built-in connectivity.

A Nanode board connected with Ethernet and equipped with a transmitter.

Across the pond in the UK, Nanode has been making a name for itself with its Arduino variant that has built-in Web connectivity. While it’s connected to a network, the board can be loaded with software remotely and it can also automatically pull updated versions of its software. The Nanode can support a few more additions, like extra memory on its underside and a wireless transmitter that it can use to send data.

The BluePanel board.

A smaller outfit called Teho Labs showed off its BluePanel Arduino boards, which connected to an Android device over Bluetooth. For this particular demo Teho Labs had six microcontrollers connected to a single RF slave that synced to their Android BluePanel app. From the app I could move a servo, switch on a lamp, or check the room’s temperature.

The Arduino Trade Show

Weblock’s spread of LED arrays and chips.

The Arduino tent was a new edition to Maker Faire, and inside you could find nearly a dozen small chip developers. ChipKIT specializes in the first 32-bit microcontrollers. Wetterott builds touchscreen interfaces and WLAN shields for Arduino. Telefonica has GSM shield components that add phone services to Arduino, allowing it to receive texts and make calls. The Weblock desk had a small cache of LED arrays, and Jeelabs has just about any component you would want.

What would you do with an Arduino board? Leave a comment with your project ideas.

Like this? You might also enjoy…

Get your GeekTech on: Twitter - Facebook - RSS | Tip us off



View the original article here



Peliculas Online